AMES Elasto Barrier 5 gallon, Adhesive Base Coat, Cure Time 7-10 Days, SEB5

AMES Elasto Barrier 5 gallon, Adhesive Base Coat, Cure Time 7-10 Days, SEB5, 856955000226

Elasto-Barrier Adhesive Base Coat is a water-based, elastomeric, liquid rubber primer designed to seal, protect, maintain, and renew existing roofs. Use on properly drained tar & gravel roofs in areas subjected to ponding water as a part of AMES Roof Coating Systems. Must be top coated with a suitable AMES UV-Resistant top-coat.

Technical specs

• VOLUME SOLIDS: 41% ± 2%
• WEIGHT SOLIDS: 46% ± 2%
• ADHESION TO VARIOUS SUBSTRATES ASTM D3359 Cross Hatch Adhesion: Dry Concrete, Plywood, Pressure Treated Plywood, Cedar, Galvanized Steel, Cold Rolled Steel, Aluminum
• COLOR: Gray
• COVERAGE: 1 gallon per 64 sq. ft. per coat
• CURE TIME: 7-10 days
• DRY FILM THICKNESS (@ 1 GAL/64 SQ. FEET): 10 mils per coat
• DRY TIME: At 40° – 80° F: 2-8 hours dry to touch, Allow 24 hours dry time between coats
• ELONGATION ASTM D6083 ASTM D412 up to 1200% at 20 Mils DFT
• FLASH POINT: >200° F
• HUMIDITY: Best applied at 50% humidity or below
• PH AS SHIPPED ASTM E70 9.4-9.9
• UV SENSITIVITY: Yes, must be top coated or covered if exposed to UV light
• SHELF LIFE: 24 Months Unopened
• PVC: 8.5%
• V.O.C CONTENT: < 5 g/l
• VAPOR PERMEABILITY: ASTM E96 Desiccant Method 0.18 perms
• VEHICLE TYPE: Acrylic/Neoprene/Styrene Butadiene Blend
• VISCOSITY: ASTM D2196 5000-6000 #6 Spindle @ 100 RPM